#Lync Question 44: What SQL collation should I use

I have been asked this question quite a few time now.

As much as I believe (according to a few SQL administrations) it is best practice to match the server collation with the database collation for performance reasons for Lync you really don’t want to this.

The server collation should be Latin1_General_CI_AS

If you interested all the Lync Server 2013 databases use Latin1_General_BIN collation, this is a case sensitivity collation and if you happen to match the collation then you will probably run into issues with mirroring the archiving and monitoring databases as they their database naming is mixed case.

Advertisements

#Lync Question 43: Can I protect federated users from taking screenshot of desktop share session content

Another common question in relation to federation, governance and control.

But yes you can protect federated users from taking screenshot of desktop share session content, however this area/capability is more Information Rights Management (IRM) in Office rather than Lync.

With IRM in Office 2013 you can authenication and authorise access to sensitive documents. For example a word document could be protected so it can only be opened by specific users. Also it can be protect from being printed, or shared, also the content can be protected from copy and paste and screenshots.

If a protected document is opened and then the screen or program is shared via Lync then it is just shown as blacked out at the other end.  This is due to Lync 2013 honouring the IRM protection.

However this behavior is only support on Windows 8 or later and not Windows 7 nor does it work with Lync 2010 and of course will need to deploy Information Rights Management (IRM).

REFERENCE:

Presenting your Screen with Lync 2013
http://blogs.technet.com/b/lync/archive/2012/11/02/presenting-your-screen-in-lync-2013.aspx

Plan Information Rights Management in Office 2013
https://technet.microsoft.com/en-us/library/cc179103.aspx

#Lync Question 42: How do I run the SkypeUI when my administrator want me to run the LyncUI

I am sure this is going to annoy some Lync administrators, however I came into work this morning after running the Skype for Business client for the last few months to the following message

SkypeUIRestart

Thus following the restart, I was back the the Lync UI.  “How retro”

Disclaimer: Playing with the registry may result is serious injury or death for your PC so everything be careful out there!

First you will need local administrator rights to do this and also have a read of my previous post #Lync Question 38: How do I control the Lync and Skype UI with the Skype for Business client regarding the registry keys.

Here is the registry with the Skype UI disabled (you might see some other keys in here too)

SkypeUIRegKey

 

Lets delete it, or via command line it would be:

reg delete HKCU\Software\Microsoft\Office\Lync /v EnableSkypeUI /f

Next we add back the registry key with the Skype UI enable

reg add HKCU\Software\Microsoft\Office\Lync /v EnableSkypeUI /t REG_BINARY /d 00000001 /f

Next lets change the permissions, select the EnableSkypeUI key and on the Edit menu select Permissions

SkypeUIRegPermissions

In here we click on Advanced and then Disable Inheritance and then select Remove all inherited permissions from this object

And then OK, Yes (we are going to denied all users permissions) and finally OK

Then we can launch the client with the SkypeUI

How do I revert?

If you want to revert in the registry edit, select HKCU\Software\Microsoft\Office\Lync in the left pane and then in the Edit menu, Permissions and we will see there is no permissions

LyncRegNoPermissions

 

 

Next click on Advanced

LyncRegAdvancedPermissions

And then Enable inheritance followed by OK and OK

There we go…..enjoy the Skype UI again

#Lync Question 41: How I do configure a Polycom SIP Phone (VVX / SoundStructure) as a Lync Common Area Phone

There are already a number of good blog articles on how to get Polycom provision server up and running to provision lots Polycom SIP phones. I would recommend Jeff Schertz blog article [1].

However as I found, most focus on setting up a Polycom SIP phone using a standard Lync user (with a full AD account and password) and not a common area phone, which has just a AD contact object.   Although you could just use an AD user account instead in some environment it is just easier just not have to justify why these accounts have non-expiring passwords.

With the UCS 5.0.2 software it added support Lync PIN authentication and although with a Polycom VVX phone it is easy enough to manually logon the phone using the screen and keypad. As I found with a Polycom SoundStructure this isn’t so easy since there is no screen or keypad and especially since UCS 5.2.0 and later the phone’s (or VoIP Ccrd) web interface is disabled by default.

Although it  is easy enough to re-enable the web interface via some additional lines in the shared.cfg XML file on the provisioning server at which point you can log to VoIP card into Lync as a Common Area Phone (below).

PolycomVoipCard-LyncSignIn

However when you have a large number of Polycom SoundStructure devices to configured or support then this quickly becomes impractical.

After a bit reading and trial and error, here is the syntax for the [MACADDRESS]–Lync.CFG file to

<?xml version="1.0" encoding="utf-8" standalone="yes"?>
<!--UCS Device Configuration file for Lync-->
<LYNC reg.1.auth.useLoginCredentials="1" reg.1.auth.loginCredentialType="extensionAndPIN" reg.1.address="room101@uctestlab.com" device.logincred.extension="1234" device.logincred.extension.set="1" device.logincred.pin="5551234" device.logincred.pin.set="1" />

Then you just need to reset the VVX/VoIP card for it just automatically logon.

References

[1] Provisioning Polycom SIP Phones
http://blog.schertz.name/2013/05/provisioning-polycom-sip-phones/

 

#Lync Question 39: Creating a Remote PowerShell session to Lync On-Premise

This is a something that comes from customer on most deployments now as the helpdesk, ,voice and network engineers cannot sadly do everything from the control panel. It is usually due to the need to create Common Area Phones or add Location Information Services Subnets or more increasingly the need to enable users for Hosted Voicemail due to using Exchange Online Unified Messaging.

There are two ways I usually recommended to create a remote PowerShell session to Lync Server On-Premise

1. Manually (via specifying the credential manually)
2. Automatically (via reading the secure password from a file)

Manual

Below is the PowerShell to create a Remote PowerShell against a production Lync environment which can be done from any workstation

$credential = Get-Credential "DomainID\AdminID"
$session = New-PSSession -ConnectionUri "https://admin.uctestlab.com/OcsPowershell" -Credential $credential
Import-PSSession $session

When manually create a Remote PowerShell session Lync, the credentials are required to be enter via the following dialogue box. This is following line #1

PSLogon

This might not be ideal in term of automation.

Automatic

If you need automatically create a Remote PowerShell session within a script then first you need to store the password in a secure string in a file via the following:

Read-host -AsSecureString | ConvertFrom-SecureString | Out-File C:\cred.txt

This is entered straight into the PowerShell window as shown below

PSSecurePassword

In case you wondered the file looks like this:

SecurePassword

Now we have this we can create the Remote Powershell session to Lync using the password in the file via the following:

$password = Get-Content C:\cred.txt | ConvertTo-SecureString
$credential = New-Object -TypeName System.Management.Automation.PSCredential -ArgumentList "DomainID\AdminID",$password
$session = New-PSSession -ConnectionUri "https://admin.uctestlab.com/OcsPowershell" -Credential $credential
Import-PSSession $session

I’m sure there are other ways too, but these two methods meet the majority of requirements with customers.

#Lync Question 36: How do I request a reverse proxy certificate for Lync

This is a favourite interview question for mine and should be straight forward enough, but you would not believe how many people can’t answer this!

Via the Lync Management Shell:

Request-CsCertificate -New -Type WebServicesExternal -AllSipDomain -verbose -PrivateKeyExportable $true -Output “C:\LyncExternalWebServices.req” -Country US -State “Washington” -City “Redmond” -FriendlyName “lyncwebsrv1.contoso.com” -Organization “Contoso” -OU “IT” -Report “C:\LyncExternalWebServices-CertReq.html” -DomainName “officewebapp1.contoso.com,anotherfqdn.contoso.com”

From the stats on my blog this popular topic as the Reissuing Certificates for Lync Mobile post following Lync Server 2010 CU4 which added Lync Mobility is but far the more hits post on my blog given the ages of the post now.

#Lync Question 35: What certificate providers can I use with Lync

It is generally recommended that supported Unified Communications Certificate Partner public CA is used for all public certificates Lync Server 2013:

Unified Communications Certificate Partners
http://support.microsoft.com/kb/929395

Also if your running Lync Phone Edition you should be mindful of the public trusted certificates installed by default:

Certificates for Lync Phone Edition
http://technet.microsoft.com/en-us/library/gg398270(v=ocs.14).aspx

A number of certificate providers are transitioning to the SHA-2 cryptographic hash functions which allow greater levels of encryption. I experienced this recently with a GoDaddy certificate reissue (whereby I needed to change the existing certificate) this causing federation issues with some organisations but not others as the new root certificate wasn’t as widely installed as Edge server are typically on restricted networks and thus might not be getting the root certificate update from Microsoft.

This came into effect with Go Daddy 23 December 2013 and is why there is now a new root certificates (‘Go Daddy Class 2 Certification Authority Root Certificate – G2’).  It is possible (at the moment) via changing the ‘signature algorithm’ during the CSR submission to still do a 2 year certificate using the older root certificate and chain. (See below)

GoDaddy-CSR

What I will say however Microsoft themselves as well as Office 365 use Cybertrust

O365cert

So does it matter? Well as long as the computer/device trusted the certificate it should not, although I like others have had certificates issued with previously OCS/Lync deployment from both the UCC partners or other providers not listed.

And Lync is all about certificates…………….

REFERENCES:

Information About Requiring the SHA-2 Hash Function’ may be helpful to you.
http://support.godaddy.com/help/article/4818?locale=en&ci=46061